Cam Clutch TFS, NFS, ASNU, VSNU, TCK 8...TFS25, TFS25, TFS30, TFS40...TFS200

Công Ty TNHH TMDV & KT SD

Tổng lượt truy cập: 157 - Cập nhật: 30/05/2018 15:39:00 PM

Cung cấp tất cả các loại bore đạn TFS - Tsubaki Japan , NFS, ASNU ( Stieber ), VSNU ( GMN ), USNU - VP-Technik, 202--020 Rexnord, TCK - Trame: TFS8, TFS12, TFS15, TFS17, TFS20, TFS25,...

Công Ty TNHH TMDV & KT SD Công ty TNHH

Add: 32 Thạch Thị Thanh, P. Tân Định, Quận 1
sales@green-drivesolution.com
(08) 6290 6137

Xem thông tin công ty

Thông tin chi tiết

Cung cấp tất cả các loại bore đạn TFS - Tsubaki Japan , NFS, ASNU ( Stieber ), VSNU ( GMN ), USNU - VP-Technik, 202--020 Rexnord, TCK - Trame: TFS8, TFS12, TFS15, TFS17, TFS20, TFS25, TFS30, TFS35, TFS40, TFS45, TFS50, TFS60, TFS70, TFS80, TFS90, TFS100, TFS120, TFS150, TFS200.

Packaging & Delivery

Packaging Detail:	SINGLE CARTON

Specifications

one way bearing for automachine,
textile machine, mining machine.
TFS, TFS-C,TSS,FSO,MG,B200,MX,MI,MA,MA,PB,BST,MZEU,BSEU,CSK.

Dimensions and capacities

Model	Torque Capacity (N.m)	Max.Overrunning Speedr/mm		Internal diameter H7(mm)	External diameter h6(mm)	Length C (mm)	Keyway (mm)	Keyway (mm)
Model	Torque Capacity (N.m)	Inner Race	Outer Race	Internal diameter H7(mm)	External diameter h6(mm)	Length C (mm)	Keyway (mm)	Keyway (mm)
TFS12	32	4500	2300	12	35	13	4x1.8	4x1.4
TFS15	34	3500	1800	15	42	18	5x1.2	5x1.8
TFS17	60	3200	1600	17	47	19	5x1.2	5x2.3
TFS20	100	2500	1300	20	52	21	6x1.6	6x2.3
TFS25	154	2000	1000	25	62	24	8x2.0	8x2.8
TFS30	270	1600	800	30	72	27	8x2.0	10x2.5
TFS35	570	1400	700	35	80	31	10x2.4	12x3.5
TFS40	728	1300	650	40	90	33	12x2.2	12x4..1
TFS45	907	1100	550	45	100	36	14x2.1	14x4.6
TFS50	1349	1000	500	50	110	40	14x2.1	14x5.6
TFS60	2370	840	420	60	130	46	18x2.3	18x5.5
TFS70	3017	750	380	70	150	51	20x2.7	20x6.9
TFS80	4370	670	340	80	170	58	22x3.1	20x7.5

Installation and Usage

1. The outer race of the TFS Series Cam Clutch was designed for press fit installation to the housing. Correct interference dimensions of the outer race must be maintained to option maximum clutch performance. The internal diameter for the housing should meet the H7 tolerance of the JIS standard. Keyways should be made in the end faces of clutch for proper installation. Refer to item 3 in the installation and usage for CSK. Series Cam Clutches for information on the installation method. If the tolerance of the internal diameter of the housing is K6,
keyways are not required on the end faces of the clutch.
2. Make sure the housing has enough strength to withstand the pressure required for the press fitting installation of the clutch.
3. When installing the clutch, mount it with a type 63 bearing to avoid radial force, since this clutch does not have any bearings inside.
4. The clutch should be mounted on the shaft by rotating it in the direction marked by the arrow shown on the clutch plate.
5. The recommended shaft tolerate is H7, and the key profile should be in accordance with the following standard.
TFS 12 ......DIN 6885.1
TFS 15~80 ......DIN 6885.3
6.Suitable surface pressure of the key should be selected according to your company design standards.

Lubrication
1.Oil lubrication is recommended.
2. Do not use greases or lubricants with EP additives.

-----
Võ Trung Can ( Mr )
Sales Mananger
H/P: 0933 492 787

SD TECHNOLOGY AND TRADING SERVICE CO., LTD

Add: 32 Thach Thi Thanh, Tan Dinh Ward

Dist 1, HCMC, VietNam

T: 08 62906137 F: 08. 62906127

Tax code: 0313666454